Fits Standard UK & European IBC Containers
Converts the Buttress IBC coarse thread (S60x6) to a more useful on/off brass extension tap.
Comes complete with a Nickle Plated Brass Snap-On connector (Hoselock compatable) for a standard UK garden hose (1/2").
The tap also acts as useful back up safety valve, or for fine flow control.
Assembled in the UK
Heavy Duty IBC CAP & Extension Bar to 1/2 inch Brass Bib Tap & 1/2 inch Nickle Plated Brass Snap-On connector. The Snap On connector is a superior quality item made from Nickle Plated Brass. It will not be prone to wear or cracking (the plastic ones have a very limited life span) and it is compatible with most Snap On connectors including Hoselock (Plastic, Brass or Alloy) This is an adapter to fit standard UK & European IBC Containers (60mm Buttress (coarse) thread) More IBC fitting information below. It converts the Buttress IBC thread (S60x6) to a more useful on/off brass bib tap, with a ZINC CHROME Snap-On connector for a standard UK garden hose (1/2 inch). The tap also acts as useful back up safety valve, or for fine flow control. The tap is fitted to a Heavy Duty connector via a 3/4 inch bore PP Extension bar which gives a lot more clearance between the tap and the IBC. This is particularly useful when the IBC outlet is recessed and makes the filling of wide necked containers much easier. The total length of this item is approximately 30 cm (12 inches) which means an additional 15 cm (6 inches) clearance from the IBC when compared to a standard tap with the Heavy Duty Adapter and even more clearance when compared to the standard tap with the basic adapter or cap. If you want a Heavy Duty, long lasting tap fitting and you dont want to struggle when trying to fill containers, this is the one for you. We also do the same item with 3 other variations of tap fittings:
Heavy Duty IBC Adapter with Extension Bar to 1/2" Brass Bib Tap & 1/2" Nickle Plated Brass Snap-On Connectorl - B00ULQTKTK