1. SIMPLE INSTALLATION, EASY TO USE,saving resources.
2. EASY CLEANING,Removable nozzles
3. MULTIFUNCTION: For agriculture, lawn, garden, patio, greenhouse ,swimming pool misting fog cooling/irrigation, watering, greenhouse, humidification, balcony cooling, irrigation (watering flowers, grass, vegetables)
4. IT IS ENERGY SAVING, WATER SAVING and low-cost with good effect
5. STRONG DURABILITY MATERIALS: The stainless steel blade is processed by advanced forging
1. It is recommended that the misting system be installed at the height of 2.5m-3m.
2. Connect the adapter to the water tap.
3. Turn on the water tap and wash the system for 1 minute and remove the impurities.
4. Screw the spray nozzle onto the tee parts, except for the end one.
5. Turn on the water tap and clean system for 2 minutes to make sure the system is completely cleaned.
6. Close the water tap and install the last nozzle to the joint and use the end cap.
7. Fix the misting hose by a cable belt saddle clamp.
8. Turn on the water tap until the sprayer works and enjoy the cooling misting system.
9. When no need to use the misting system for long time, close the nozzle and keep it dry and clean.
1. 6 m fine spray set
2. The nozzle series does not need air auxiliary, and the system device is simple. Its spray is fine with full atomization. Furthermore, it is energy saving, water saving and low-cost with good effect. The stainless steel blade is processed by advanced forging, thus with strong durability. Its service life is 2.5 times as long as similar nozzles.
3. This nozzle can be fully utilized with the pressure of tap water. If high pressure water pump is used, the effect is better.
1 * 3/4 inch internal thread faucet connector
6 * clips
6 * sprinklers + bases ( sending one sprinkler)
1 * 6m pipe
1 * choke plug
Mist Cooling System Kit 6M Fine Cooling Nebulization Set Moisturizing Spray Garden Patio Misting Micro Irrigation Atomizing With Mist Nozzles - B07518G883